Tel: 01223 499488


Granta Can Palletiser

Modular Can Palletising System

The Modular can palletising system is quick to install, low cost and fast and easy to program.

Depending on your production process, you many need to palletise multiple different can sizes off the same production line. This is where the Modular palletising series comes into play. The easy programming software on the Modular palletising series enables your factory floor staff to re-program the robot for palletising different can sizes within minutes.

Stack patterns are automatically optimised in the software enabling you to quickly select the best stack pattern to get the most cans on your pallets without having to spend a lot of time planning.

Can palletising usually requires an underneath gripper head. The underneath gripper has a plate that goes underneath the can, and an arm that drops down and clamps across the top of the can. When the can is in the correct location the clamp is then released and the can is pushed off the gripper plate onto the pallet stack. The underneath gripper also has an integrated vacuum gripper that is used to pick and place the pallets onto the conveyor, and to pick and place slip sheets between layers if they are required.

Palletising speeds are optimised to suit your process and depending on the speeds you need to achieve, a standard pick and place method may be used, or for higher speed applications, a layer forming process will be used.

Custom modules can also be added to the Modular palletising series such as; case erectors, pallet stretch wrapping, labelling, etc. More information on the Modular palletiser series is available on the links below.

Achieve new successes, jump ahead of your competition and stay at the cutting edge of your industry. Browse our website or contact us today for help, advice and support with your project.

We look forward to helping you achieve with automation!

Watch automation videos...