The GA15 sack palletising system is quick to install, low cost and fast and easy to program.
Depending on your sack filling line, you many need to palletise different sack sizes off the same production line. This is where the GA15 palletising series comes into play. The easy programming software on the GA15 palletising series enables your factory floor staff to re-program the robot for palletising different carton sizes within minutes.
A sack gripper is usually used to pick and place sacks onto the pallet. The sack gripper has positioning pins, lifting pins and a centre clamp which is also a vacuum gripper. Due to the unique way in which the gripper works this results in a very neatly stacked pallet. The vacuum gripper also enables the gripper to pick and place the pallets onto the conveyor.
Sack stacking patterns are automatically optimised in the software which enables you to quickly select the best stack patterns to get the most on your pallets without having to spend a lot of time planning.
Palletising speeds are optimised to suit your process and depending on the speeds you need to achieve, a standard pick and place method may be used, or for higher speed applications, a layer forming process will be used.
Custom modules can also be added to the GA15 palletising series such as; pallet stretch wrapping, labelling, etc. More information on the GA15 palletiser series is available on the links below.
Achieve new successes, jump ahead of your competition and stay at the cutting edge of your industry. Browse our website or contact us today for help, advice and support with your project.
We look forward to helping you achieve with automation!
Payback is often less than 1 year due to labour saving, production increase, reduced HR.
H&S claims reduced to zero as all manual handing is now done by the robotic palletiser.
Typically +40% due to: no holidays or breaks, forced takt time, longer working hours, faster speeds etc.